|
ZX-地基式液壓后卸平臺
收藏
商品說明
ZX-地基式液壓后卸平臺 自動卸車設備----液壓翻板機是實現普通汽車和集裝箱對散物料運輸過程中自動,高.效卸車的專用機械裝置,自動卸車設備可以解決過往過度人力卸車問題,廣泛適用于糧油、建材、水泥、造紙、冶金、礦山等有散裝物料接收作業的場合。 產品特點: ◇平臺整體結構具有足夠的強度和剛度,起升過程中變形很小; ◇在特定范圍內,傾斜角由操作員任意設定及調節; ◇采用固定或多組擋輪器,加大了車輛的適應范圍; ◇特殊的升降裝置,保證了頂升力量,提高了設備穩定性和設備運行的安.全可靠; ◇液壓系統處于地面之上,易于安裝和維護保養; ◇兩側液壓缸同步運行,平臺保持水平,汽車不易傾斜,對汽車有保護作用; ◇主要控制元件和主要液壓閥件均采用進口產品; ◇緊急情況時,液壓系統能停止運行并自動發出警報,在斷電或液壓管破裂的情況下,液壓系統能自動自鎖; ◇采用PLC控制,具有安.全連鎖功能,操作失誤時不會引起設備的誤動作而發生危險; 技術參數: 型 號:ZX-TQXH100 平臺尺寸:18×3m 工作傾角:≥35° 最大起升重量:100T 起升時間:240s 降落時間:8分鐘 最大高度要求:6m 電機功率:22kw 商品參數
Automatic unloading equipment ---- hydraulic plate turning machine is a special mechanical device to realize automatic and efficient unloading of ordinary cars and containers in the process of bulk material transportation. Automatic unloading equipment can solve the problem of excessive manual unloading in the past, Widely used in grain and oil, building materials, cement, paper making, metallurgy, mining and other occasions where there are bulk materials receiving operations. Product features: ◇The overall structure of the platform has sufficient strength and stiffness, and the deformation is small in the process of lifting. ◇In a specific range, the inclination Angle can be set and adjusted by the operator. ◇Fixed or multiple groups of wheel gear, increase the vehicle's range of adaptation; ◇Special lifting device, to ensure the lifting force, improve the stability of equipment and equipment operation safety and reliability; ◇Hydraulic system on the ground, easy to install and maintenance; ◇Hydraulic cylinders on both sides of the synchronous operation, the platform to keep level, the car is not easy to tilt, the car has a protective effect; ◇The main control components and main hydraulic valve parts are imported products. ◇In case of emergency, the hydraulic system can stop running and automatically give an alarm. In case of power failure or hydraulic pipe rupture, the hydraulic system can automatically lock. ◇PLC control, with safety chain function, operation error will not cause the misaction of equipment and risk; Technical parameters: Model : ZX-TQXH100 Platform size : 18×3m Working Angle : ≥35° Max. lifting weight : 100T Lifting time : 240s Landing time : 8分鐘 Max.height requirement : 6m Motor power : 22kw |